Industrial Adhesives and Sealants

Industrial adhesives and sealants from Soudal are formulated for manufacturing, fabrication, and high-volume production environments, where consistent cure performance and bulk supply matter as much as bond strength. The range draws on the same MS Polymer, polyurethane, and silicone chemistries used across Soudal’s trade products, supplied in formats suited to production line and OEM use rather than single-job retail packs.

Built for repeat production runs, not one-off fixes.

As the largest independent European manufacturer of sealants, adhesives, and polyurethane foams, Soudal supplies industrial partners with consistent formulations backed by full technical and safety documentation for compliance and quality assurance. Products in this category are selected for specific manufacturing applications including panel bonding, gasket sealing, and structural fixing, with bulk packaging options to reduce downtime on production lines. Technical support is available to help specify the correct chemistry and cure profile for a given production process or substrate combination.

• 154002  – Part A & B 300ml each
• Fast curing
• Excellent adhesion on aluminum
• Fast strength build-up

• 290ml, grey & white
• Flexible
• High initial tack
• Fast strength build-up

• 600ml, white
• High short term temperature resistance: maximum 30 minutes in a drying oven at 200 °C. Soudabond 675 HR must be fully cured before it can withstand the temperature spike.

• 600ml & 290ml, multiple colours
• Fast curing
• High initial tack
• Very good adhesion on many materials

• 131249 16kg
• Universal use
• Short evaporation time
• Fast build-up of end strength

• 137106 – 146064
• 600ml – Multiple colours
• Fast curing for improved productivity
• Excellent extrudability for easy application

Choosing the right industrial adhesive or sealant

Industrial specification differs from trade specification in three ways: consistency across batches, compatibility with automated or high-volume application equipment, and documented compliance for quality assurance and OH&S requirements.

Production line bonding. MS Polymer and polyurethane adhesives offer consistent open and cure times suited to automated or semi-automated application on a production line.

Gasket and enclosure sealing. Neutral-cure silicone and MS Polymer sealants provide a reliable, movement-tolerant seal for enclosures, housings, and gasket replacement in manufacturing.

High-volume supply. Bulk contact adhesive formats reduce changeover time and packaging waste compared with single-job cartridges, suited to continuous production environments.

Technical differentiators

• Batch consistency: Formulated and tested for repeatable performance across production runs
• Bulk packaging: Available in larger container formats to suit production-line supply chains
• Documentation: Full technical datasheets and safety data sheets provided for compliance and quality assurance records
• Chemistry options: MS Polymer, polyurethane, and silicone, matched to the substrate and process involved

Industrial adhesives and sealants application guidance

Industrial application should follow the process parameters on the product’s technical datasheet, including working time, cure profile, and any surface preparation or primer requirements specific to the substrate in use. For automated or semi-automated dispensing, confirm the product’s viscosity and cure speed are compatible with the equipment before committing to a production run. Contact Soudal’s technical team for support specifying a product for a new manufacturing application or substrate combination not covered in the standard datasheet.

For manufacturing or OEM supply enquiries, contact us directly or find your nearest stockist.